Install Remote Control Batteries
Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
•
Even if the Remote Control is operated within the eective range (6m),
remote control operation may be impossible if there are any obstacles
between the unit and the remote control.
•
If the Remote Control is operated near other products which generate
infrared rays, or if other remote control devices using infra-red rays are used
near the unit, it may operate incorrectly. Conversely, the other products may
operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab
to activate the remote control battery.
Replace the Remote Control Battery
1 Pull out the battery tray and remove the old battery.
2 Place a new CR2025 battery into the battery tray
with correct polarity (+/-) as indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
•
When the Remote Control is not going to be used for a long time (more than a month), remove the
battery from the Remote Control to prevent it from leaking.
•
If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries
with new ones.
•
Do not use any batteries other than those specied.
•
Do not heat or disassemble batteries.
Never throw them in re or water.
•
Do not carry or store batteries with other metallic objects as this may cause the batteries to short-cir-
cuit, leak or explode.
•
Never recharge a battery unless it is conrmed to be a rechargeable type.
Connections
Using the AUX Connection
- Use a RCA to RCA stereo audio cable (included) to connect the TV’s audio output sockets to the
AUX(R L) socket on the unit.
Mp3 PlayerPhone
- Use a RCA to 3.5mm audio cable (not included) to connect the audio player’s headphone socket to
the AUX(R L) socket on the unit.
To Next Page
Loading...
Need help?
Power
Audio
Speakers
Weight and Dimensions