To Next Page

To Previous Page

Play iPod/iPhone

You can enjoy audio from an iPod/iPhone through this unit.

1 Place the iPod/iPhone into the dock.

- This apparatus does not support Apple 30 pin

models.

2 Press the button on the main unit or press

the DOCK/USB button on the remote control

to select the IPOD mode.

3 Start to play the connected iPod/iPhone.

- To pause/resume play, press the

button.

- To skip to a track, press the

buttons

on the unit or on the remote control.

- Press and hold the

buttons on the

unit or on the remote control to perform fast

forward/reverse playback. Release the button to resume normal playback.

- To select repeat play options: press the REPEAT button repeatedly to select a repeat option play

mode.

- To select shue play options: press the SHUFFLE button repeatedly to select a shue option play

mode.

Charge the iPod/iPhone

- The docked iPod/iPhone begins to charge as soon as the unit is connected to AC power.

Bluetooth Operation

The unit has a Bluetooth function that can receive a signal within 8 metres.

Pair Bluetooth-enabled Devices

- The operational range between this player and a Bluetooth device is approximately 8 meters (without

any object between the Bluetooth device and the unit).

- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.

- Compatibility with all Bluetooth devices is not guaranteed.

- Any obstacle between this unit and a Bluetooth device can reduce the operational range.

- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 Press the button on the main unit or press the BT/AUX button on the remote control to select

BT(Bluetooth) mode. “NO BT” will show on the display if the unit is not paired to any Bluetooth device.

2 The system has entered pairing mode.

- Or press and hold the "

/PAIR" button on the remote control or the "

" button on the unit to

be searchable. The Bluetooth indicator will ash rapidly. The display will show “PAIR”.

3 Activate your Bluetooth device and select the search mode. “inStudio 8021091” will appear on your

Bluetooth device.

4 Select “inStudio 8021091” in the pairing list. Display panel shows “BT” while the pairing succeeds.

5 To disconnect the Bluetooth function, switch to another function on the unit or disable the function

from your Bluetooth device.

power requirements	AC110-120V~ 60 Hz
power consumption	25W
output power (max)	5W x2

total harmonic distortion	1%(1kHz, 1W)
audio input sensitivity	500mV
frequency response	45Hz - 20KHz
tuning range	87.5 - 108.0MHz

distance	6m
angle	30O

Polaroid VCM632 User Manual

Table of Contents

Questions and Answers:

Polaroid VCM632 Specifications