No response from the unit
- Disconnect and reconnect the AC power plug, then turn the unit on again.
Poor radio reception
- Increase the distance between the unit and your NFC compatible bluetooth device or the TV and VCR.
Clock setting erased
- Power has been interrupted or the power cord has been disconnected.
- Reset the clock.
No Response From the Unit
- Disconnect and reconnect the AC power plug, then turn on the unit again.
I can not nd the Bluetooth name of this unit on my Bluetooth device
- Ensure the Bluetooth function is activated on your Bluetooth device.
- Re-pair the unit with your Bluetooth device.
Some NFC-enabled mobile devices cannot pair directly with the unit via NFC Please try
either one of the solutions below:
- Download and install NFC reader apps into your NFC-enabled mobile device. Please refer to your
mobile device’s guidebook for more details.
- Pair with the unit via Bluetooth rst, then tap again on the icon.
- Simply pair with the unit via Bluetooth.
The disc does not play
- There is no disc inside the unit (“NO DISC” appears on the display).
- Insert the disc correctly with the label side facing up.
- Clean the disc.
- PAUSE mode may be activated, deactivate it.
- A non-valid disc has been inserted.
- Condensation may have formed inside the unit due to a sudden change in temperature. Wait about
an hour for it to clear and try again.
Using iPhone to play music
- While the iPhone is playing the music throught the docking, there may be a chance that the iPhone
may not be under a good receiption mode to get the incoming call signal.
To Next Page
Loading...