• Red-eye Removal
Under this setting, red-eye glare in your subject’s eyes may be removed
from the image.
1. Turn the Mode Dial to
.
2. Press the left or right button to select the
JPEG picture you want to manage.
3. Press the
button to access the
function bar.
4. Press the down button to select the
icon. Press the
button and a small
frame will appear.
5. Use the
button to shrink the frame and
use the
button to return it to the normal
size.
6. Use the up, down, left and down buttons
to move the frame around and frame the
red-eye glare inside.
7. Press the
button and the enhanced
image will be shown on the LCD screen.
8. Press the
button.
NOTE:
• The original le may be replaced by selecting the
icon on the function bar
and press the
button.
• A new le will be created and saved onto the memory card by selecting the
icon on the function bar and press the
button.
To Next Page
Loading...
Need help?
General
