Symptom Problem Solution
The camera cannot
take pictures.
The ash is recharging.
Or
The SD card is not
formatted correctly.
Or
The camera is set to
the
mode.
Or
The SD card Memory is full.
Wait until completing recharging
the ash.
Or
The SD card may be damaged.
Please use a new card.
Or
Set the camera in
,
,
,
,
or
mode.
Or
Delete images you no longer need,
or use another memory card.
Recorded pictures are not
saved in memory.
Camera powers off before
the save operation is
completed.
Or
Removing the memory card
before the save operation is
completed.
If the battery is exhausted, recharge
your battery.
Or
Do not remove the memory card
before the save operation is
completed.
Colour of the playback
pictures is different from
the picture on the LCD
screen during recording.
Sunlight or light from
aother source is shinning
directly into the lens during
recording.
Position the camera so that sunlight
does not shine directly onto the lens.
Pictures are not diplayed. A memory card with non-
DCF pictures recorded with
another camera is loaded in
the camera.
The camera cannot display non-DCF
pictures recorded onto a memory
card used by another digital camera.
LCD screen does not
apear on the screen of
the connected television.
There is a problem with the
camera-TV connection.
Or
TV setup is wrong.
Or
Video system is
incompatible.
Use the supplied video cable to
connect the camera to the TV.
Or
Consult the documentation of the TV
and set it to video mode.
Or
Select the proper video output
system.
I cannot erase pictures. All the pictures in the
current memory are
protected.
Unprotected the pictures and video
clips you want to erase.
Please also refer to the help les & User Guides that accompany the
enclosed applications.
For further information and support, please visit our web site:
http://www.polaroid-digital.com
To Next Page
Loading...
Need help?
General
