EN-16
Initial Settings
Setting the Date and Time
The date/time needs to be set when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD display, follow these
steps to set the correct date and time.
1. Toggle the MODE button, and set the camera mode to [ ] or [ ]; or press the 7
button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with
the c / d buttons, and press the OK button.
4. Select [Date/Time] with the c / d buttons, and
press the OK button.
5. Select the date format with the c / d buttons,
and press the OK button.
Select the item’s field with the e / f buttons
and adjust the value for the date and time
with the c / d buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct,
press the OK button.
6. To exit from the [Setup] menu, press the MENU
button.
;;
;;
2012
01 01
To Next Page
Loading...
Need help?
General
