EN-36
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing still images.
1. Toggle the MODE button, and set the camera mode to [ ].
2. Press the MENU button.
3. Select the desired option with the c / d buttons, and press the OK button to enter
its respective menu.
4. Select the desired setting with the e / f buttons, and press the OK button.
5. To exit from the menu, press the MENU button.
EV
Your camera adjusts the exposure of each shot automatically. However, if the subject is
very dark, or very bright, you may override the camera's automatic exposure setting to
make the subject brighter or darker. This is called EV compensation. The EV
compensation can be adjusted from -2.0EV to +2.0EV.
Size
This sets the size of the image that will be captured.
* 10M(FW interpolation) / 8M(FW interpolation) / 5M / 3M / VGA
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO number is increased), images taken under low lighting or darker areas of the image
will be seen, but the image may be more pixelated/grainier overall. As a "rule of thumb"
the higher the ISO value the more grain in the image.
* Auto / ISO 100 / ISO 200 / ISO 400
Quality
This sets the quality (compression) at which the image is captured.
* Fine / Standard / Economy
;;
To Next Page
Loading...
Need help?
General
