EN-42
Setup Menu
Set your camera’s operating environment.
1. Toggle the MODE button, and set the camera mode to [ ] or [ ]; or press the 7
button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the c / d buttons, and press the OK
button.
4. Select the desired option item with the c / d buttons, and press the OK button to
enter its respective menu.
5. Select the desired setting with the e / f buttons, and press the OK button.
6. To exit from the menu, press the MENU button.
Date/Time
Refer to the section in this manual titled “Setting the Date and Time” for further details.
Language
Refer to the section in this manual titled “Choosing the Language” for further details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* Off / 1 Min. / 2 Min. / 3 Min.
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Fr. No. Reset
This creates a new folder. The captured images are recorded to the newly created
folder from number 0001.
* Cancel / Confirm
;;
;;
Light Freq.
50 Hz
To Next Page
Loading...
Need help?
General
