Polimaster PM1610B User Manual

18
2.2.7.5 Setting alarm threshold levels for DER and DE, resetting DE ("THRESHOLD")
Select "THRESHOLDS" to move to the settings of the alarm threshold levels for DER or
DE . The LCD will display the following information, Figure 2.12.
Figure 2.12
Select "DER" to set or check two DER thresholds ("THRESHOLD 1" and
"THRESHOLD 2"). The LCD will display the following information, Figure 2.13.
Figure 2.13
When "THRESHOLD 1" is selected, the LCD will display the following information,
Figure 2.14.
Figure 2.14
To change the threshold press "NEXT". Use "SELECT" to change an underlined symbol of
the threshold. Use "NEXT" to move to the next symbol and press "DONE" to exit the threshold
settings. The dosimeter will memorize the new value of the alarm threshold level.
Set the second DER threshold (line "THRESHOLD 2") in the same way as the first
threshold.
Select "DE" to set or check two DE thresholds ("THRESHOLD 1" and
"THRESHOLD 2") and to reset DE. The LCD will display the following information, Figure 2.15.
Figure 2.15
Set the DE thresholds ("THRESHOLD 1" and "THRESHOLD 2") in the same way as the
DER thresholds.
To zero DE indication select “RESET DE” and press “YES”.
2.2.7.6 Selecting types of alarm ("ALARM")
Select "ALARM" in the "SETTINGS". The LCD will display the following information,
Figure 2.16.
Figure 2.16

Polimaster PM1610B Specifications

General

Brand	Polimaster
Model	PM1610B
Category	Measuring Instruments
Language	English