Polimaster PM1701M - Instrument;Program Settings

15
- current values of count rate in data logging intervals preset by the
user;
- coefficient n value;
- count time in the search and calibration modes;
- alarm time and values.
Instrument/Program Settings:
Check and/or set parameters of the instrument:
- switch on/off audible alarms;
- enable/disable switching on/off the alarm using control buttons;
- check or change coefficient n;
- check or change the time and date;
- check or change the logging intervals in which count rate values are stored in
non-volatile memory of the instrument;
- check or change password to enter the parameters settings (default password:
1);
- switch on/off automatic background calibration;
- switch on/off display of statistic uncertainty values.