66
Priority Transmit (TX.SEL---MENU 2)
Functions: DB-10 allows you to transmit on the sub band even if you are working
on the operating band.
Enter Menu 2nd to select priority transmit band. Default: EDIT.
EDIT: It will transmit on the operating band.
BUSY: It will transmit on the band last talking used.
VOX Level & VOX Switch (VOX&VOX.SW---MENU 3&16)
Functions: the VOX function provides automatic transmit/receive switching ba-
sed on voice input to the microphone. With the VOX switch ON, you do not need
to press PTT switch in order to transmit, and it is not necessary to use a VOX
headset in order to utilize VOX operation.
Enter Menu 16th to set VOX switch. Default: OFF.
When the VOX is activated, the “VOX” icon will appear on the display.
Enter Menu 3rd to set VOX level. It has 9 grades.
The higher level is, the more sensitive will be.
DB-10 provides for adjustment of “Hang-Time” of the VOX (the transmit-receive
delay after the cessation of speech) via program software. Default: 2s.
TX Power setting (POW---MENU 4)
Functions: you can select high/low TX power according to your talking envi-
ronment and need. When you store memories, you can store High and Low power
settings separately in each memory.
Enter Menu 4
th
to set TX power.
High: 10 W.
Low: 5 W, when you select Low power, the “L’ icon will appear on the display.
To Next Page
Loading...
