68
Keypad Beeper setting (BEEP---MENU 9)
Functions: enable/disable the keypad beeper.
Enter Menu 9th to set keypad beeper. Default: ON.
Transmitter Time-Out Timer (TOT---MENU 14)
Functions: the TOT feature provides a safety switch which limits transmission to
a pre-programmed value. This will promote battery conservation by not allowing
you to make excessively-long transmissions, and in the event of a stuck PTT
switch it can prevent interference to other users as well as battery depletion.
Enter Menu 14th to set TOT. Default: OFF.
Busy Channel Lock-Out (BCLO---MENU 15)
Functions: the BCLO feature prevents the radio’s transmitter from being activa-
ted if a signal strong enough to break through the “noise” squelch is present. On
a frequency where stations using different CTCSS or DCS codes may be active,
BCLO prevents you from disrupting their communications accidentally (because
your radio may be muted by its own tone decoder).
Enter Menu 15th to set BCLO. Default: OFF.
OFF: Disable BCLO feature.
WAVE: the radio’s PTT will be prevented only if the frequency is busy used.
CALL: the radio’s PTT will be prevented only the frequency and tone coder is
the same.
To Next Page
Loading...
