To Next Page
C
Cody Hughes Jr.Aug 11, 2025
Why is my POLMAR Transceiver operating time so short even when fully charged?
- HHenry GarciaAug 11, 2025
If your POLMAR Transceiver's operating time is short despite a full charge, the battery likely needs replacing.
Why is my POLMAR Transceiver operating time so short even when fully charged?
If your POLMAR Transceiver's operating time is short despite a full charge, the battery likely needs replacing.
What to do if I can't communicate with the same group transceivers on my POLMAR DB-32?
If you are unable to communicate with transceivers in the same group using your POLMAR Transceiver, check the following: * Confirm that the QT/DQT settings are identical across all devices. * Ensure that the distance between the transceivers is within the operational range.
What to do if I hear voices from another group on my POLMAR DB-32 Transceiver?
If you are hearing voices from another group on your POLMAR Transceiver, you should change all QT/DQT settings for your group to prevent interference.
How to fix a POLMAR Transceiver with no electrical source?
If your POLMAR Transceiver has no electrical source, try the following: 1. If the battery is exhausted, replace or recharge it. 2. If the battery is installed incorrectly, remove it and reinstall it properly.
General| Frequency Range | 400-470 MHz |
|---|---|
| RF Output Power | 5W |
| Operating Voltage | 7.4V DC |
| Modulation | FM |
| Weight | 220 g |
| Battery | Li-ion |
