WINDOW SLIDER KIT INSTALLATION (Fig. 9, Fig. 10, Fig. 11 and Fig. 12)
The window slider kit has been designed to fit most standard "vertical" and "horizontal" window applications. It may
be necessary for you to improvise/modify some aspects of the installation procedures for certain types of
windows. Some window types may require the use of cardboard fillers and/or duct tape to install.
Please refer to illustration for minimum and maximum window openings.
Insert Altitude unlimited drawing here – awning window and sliding door Fig 11 and 12
Window slider length
Gaps can be sealed using
cardboard or plastic and duct tape.
Window (Door) slider height
Standard door height 210cm.
Gap can be sealed using
cardboard and duct tape.
Additional window sliders
can also be purchased to fill
this gap.
WINDOW SLIDER INSTALLATION
The window slider has been designed to t most standard “vertical” and “horizontal” window applications. It may be nec-
essary for you to improvise/modify some aspects of the installation procedures for certain types of windows. Some
window types may require the use of cardboard or plastic llers and/or duct tape to install. Additional complete window
kits may be purchased from POLO to enable pre-installation in windows in other rooms.
Please refer to illustration for minimum and maximum window openings.
To Next Page
Loading...
