Poly Edge E100

• Go to Settings > Basic > PLT Hub > Advanced.
• Go to PLT Hub > Advanced.
2 Select Noise Exposure.
3 Select one of the following:
• No Limiting
• Limited at 80 dBA
• Limited at 85 dBA
Set the Hours on Phone Per Day
You can set the headset with the number of hours on the phone per day to optimize the decibel limits.
Task
1 Do one of the following:
• Go to Settings > Basic > PLT Hub > Advanced.
• Go to PLT Hub > Advanced.
2 Select Hours on Phone Per Day.
3 Select the number of desired hours.
Restore Default Settings
You can restore the headset default settings from your Edge E Series phone.
Task
1 Do one of the following:
• Go to Settings > Basic > PLT Hub > Restore Defaults.
• Go to PLT Hub > Restore Defaults.
2 Select Yes.
87
DRAFT