Poly POTE16 User Manual

Your new headset has enough power to pair and make a few calls directly out of the box. It
takes approximately 90 minutes to fully charge the headset; the indicator light turns off
once charging is complete.
A micro USB cable is supplied to allow you to charge the headset with an AC wall charger
(not included) or through a PC's USB port. The PC must be powered on to charge via USB
2.0 or higher.
NOTE Always charge at near room temperatures; never charge battery at temperatures below
0°C (32°F) or above 40°C (104°F).
1 Check your earbud battery level:
• Listen to the voice prompt when you remove your earbuds from case and put them on.
• View battery level in BackBeat app. Download at poly.com/software.
Voice prompt
Listen time
"Battery high" 3 hours or more
"Battery medium" 1 to 3 hours
"Battery low" 10 minutes to 1 hour
"Battery critical" Less than 10 minutes
2 Check the charge case battery level by pressing the charge case button and viewing the
LED inside the case.
Charge case LED
Battery level
Battery high
Battery medium
Battery low
Battery critical
Charge your headset
Check battery level
4

Poly POTE16 Specifications

General

Brand	Poly
Model	POTE16
Category	Headsets
Language	English