1 To put your headset in pair mode, press the Call button until you hear "pairing" and the
headset LEDs flash blue and red.
2 Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth On > Scan for devices*
NOTE *Menus may vary by device.
3 Select “Poly V5200 Series.”
Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth adapter.
NOTE This feature is available on select models
NFC pairing is an option if you have no more than one other device already connected.
NFC pairing will not work if there are two devices connected already.
1 On your mobile phone ensure NFC is enabled and your phone’s display is unlocked.
(Phones may vary and some phones may not have NFC support.)
2 With the headset powered on, lay the headset on the back of phone near the NFC tag on
phone as shown until NFC pairing completes. If necessary, accept the connection.
After pairing your headset to your phone, you may want to pair another phone.
1 Power on your headset.
2 Choose:
• Press and hold the Call button
until you hear "pairing"
3 Activate Bluetooth on your phone and set it to search for new devices.
4 Select “Poly V5200 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset indicator lights
stop flashing.
Pair your phone
Pair to mobile device
NFC pairing
Pair Another Phone
8
To Next Page
Loading...
Need help?
General