A fully charged case can recharge your headset fully two times for an additional 14 hours
of headset talk time.
IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power
and protect the battery. To wake-up the charge case, plug it into a power source for a minimum of
1 minute. The LED's flash when charging.
Check the charge case battery status by pressing the button on the side.
Battery status LEDs for charge case
Battery high
Battery medium
Battery low
Battery critical; Recharge case/headset
NOTE Charge case is sold separately. Visit poly.com/accessories for more information.
Use charge case
6
To Next Page
Loading...
Need help?
General