Power
Power on/off your earbud system
Your earbuds and case power on and off automatically.
To power on, do one of the following:
• Open your charge case to automatically power on the earbuds. Conversely, place
your earbuds in the case and close the lid to automatically power your earbuds off
and start charging them.
• Tip: If you don't hear a voice alert when you put on your earbud, click the earbud
button once to power it on.
DeepSleep mode
If you leave your earbuds powered on but out of range of your paired device, they
conserve power by entering DeepSleep mode after 90 minutes.
To exit DeepSleep mode, power on by clicking each earbud button.
10
To Next Page
Loading...
