Connect and pair
Pair to mobile device
1 Choose from 2 ways to put your earbuds in pair mode.
• Press and hold your earbud button for 4 seconds until you hear "pairing."
• With your earbuds in the charge case, open the lid and press the charge case
button for 4 seconds. The charge case LEDs flash red and blue.
2 Activate Bluetooth
®
on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android
™
Bluetooth: On > Scan for devices*
Note: * Menus may vary by device.
3 Select " Poly VFree 60 Series."
When your earbuds are successfully paired, you hear “pairing successful” and "phone
connected."
Reconnect
With Bluetooth activated and in range, click your earbud to reconnect to your mobile
device.
Pair mode
Put your earbuds in pair mode to connect to a new device or to pair again.
• Press and hold your earbud button for 4 seconds until you hear "pairing."
11
To Next Page
Loading...
