What to do if Polyaire Zonemaster Zone Switch touchpad not responding?
If your Polyaire Control Systems touchpad is not responding, ensure the power supply is on and check that the fuse in the power supply hasn't blown.
How to troubleshoot Polyaire Zonemaster Zone Switch dampers with no response?
If the dampers in your Polyaire Control Systems are not responding when turned on or off, check the following: * Ensure the cable from the touchpad to the damper motor is properly plugged in. * Test the cable with a cable tester and replace it if faulty. * Test the damper motor by connecting a spare damper motor to the same zone output port. Replace the damper motor if it's faulty.
Why does Polyaire Zonemaster Zone Switch Control Systems damper motor drive the wrong way?
If a Polyaire Control Systems damper motor is driving the wrong way, the damper blade might be installed in the wrong position. Reposition the blade by removing the damper motor and re-aligning it to the correct position. Also, check the cable connecting the damper motor and the touchpad for faults, and replace it if necessary.
Describes the layout and components of the wall controller touchpad for zone control.
Explains how to activate and deactivate individual zones using the touchpad buttons.
Details the suitability of the Zonemaster Zone Switch system for various HVAC applications.
Lists the key functionalities and benefits of the two-zone damper control system.
Identifies and illustrates the essential parts included in the Zonemaster Zone Switch kit.
Provides a visual guide for connecting the system components according to the wiring diagram.
Advises on how to define and name distinct air-conditioned zones for optimal control.
Details steps for preparing the touchpad, including applying zone names and labels.
Guides users through the physical installation process of the touchpad on the wall.
General| Manufacturer | Polyaire |
|---|---|
| Product Name | Zonemaster Zone Switch |
| Input Voltage | 24VAC |
| Operating Temperature | 0°C to 50°C |
| Warranty | 2 Years |
| Zones Supported | Up to 8 Zones |
| Power Supply | 24V AC |
| Power Consumption | 5VA |
To Next Page
