Polyaire Zonemaster Zone Switch - Operation Instructions; Wall Controller Layout (Touchpad); Turn Zone ON;OFF

ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions
2
1) Wall Controller Layout (Touchpad)
2) Turn Zone ON/OFF
a)
Press the zone button once to turn the zone ON.
The LED will light up indicating the zone is On
(Zone Opened). The LED will stay on until the zone is
turned OFF.
b) Press the zone button again to turn the zone OFF.
The LED will turn OFF indicating the zone is OFF
(Zone Closed).
Note: If power fails, zones will automatically resume their
original position prior to failure once power is returned.
OPERATION INSTRUCTIONS
ZONE BUTTON
LED
ZONE NMAE
LABEL