EasyManua.ls Logo

Polycom 6000 - Page 6

Polycom 6000
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use only 26 AWG line cord or larger for
Central Ofce line connections.
CAUTION
openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat reg
-
ister. This product should not be placed in a built-in installa-
tion unless proper ventilation is provided.
This product should be operated only from the type of pow
-
er source indicated in the manual. If you are not sure of the
type of power source to your building, consult your dealer
or local Power Company.
The power socket outlet must be located near the product
and must be easily accessible to allow plugging/unplugging.
Do not allow anything to rest on the power cord. Do not
locate this product where persons walking on it will abuse
the cord.
Do not use an extension cord with this product’s AC power
cord. The AC outlet for this product should not be used for
any other electrical equipment.
Never push objects of any kind into this product through
cabinet slots as they can touch dangerous voltage points
or short out parts that could result in a risk of re or electric
shock. Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not disassemble this
product, but take it to a qualied serviceman when some
service or repair work is required. Opening or removing
covers can expose you to dangerous voltages or other
risks. Incorrect re-assembly can cause electric shock when
the product is subsequently used.
Unplug this product from the wall outlet and refer servicing
to qualied service personnel under the following condi
-
tions: - When the power supply cord or plug is damaged or
frayed.
- If liquid has been spilled into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by following the
operating instructions.
- Adjust only those controls that are covered by the oper-
ating instructions because improper adjustment of other
controls can result in damage and will often require exten
-
sive work by a qualied technician to restore the product to
normal operation. - If the product has been dropped or the
cabinet has been damaged.
- If the product exhibits a distinct change in performance.
Avoid using a telephone during an electrical storm. There
can be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity
of the leak.
6

Table of Contents

Related product manuals