Polycom 6000 - Page 61

• Incoming calls
• Ending a call, holding a call, resuming a call by the other party
• A voice message received
If you do not press any keys on the phone, after 20 seconds of
the backlight turning on, the backlight dims (or changes) to medi
-
um in the following cases:
• A call is in progress
• A call is on hold
• There is an incoming call (ringing)
• There is an outgoing call (ringing back)
• Any menu shows on the display
In all other cases, the Backlight Idle intensity applies
To change the backlight intensity:
1. Press , and then select Settings > Basic > Backlight
Intensity.
The Backlight Intensity screen displays.
2. Select Backlight On Intensity.
The Backlight On Intensity screen displays.
3. Scroll to the intensity you want, and then press . The default
Backlight On Intensity is High.
4. If you selected a new intensity, press the Save soft key. If you did not
select a new intensity, press .
5. Select Backlight Idle Intensity.
61