Polycom EagleEye Director - Page 8

8 
AfterclickingAddGroupselecttheAmplifierchanneland,whilepressingtheCtrlbuttononthekeyboard,clickthe
outputchannelEagleEyetoselectbothoutputsandthenclickAddChannel>.Thiswilladdbothaudiochannelstothe
ToLocalRoomgroupasshowninFigure12.

Figure 12 - Use Ctrl left click to select multiple audio channels and then, press Add Channel>.
AfterpressingAddChannel>theresultingEditGroupspageappearsasshowninFigure13.

Figure 13 - The ToLocalRoom group includes the Amplifier and EagleEye channels.
TheresultingmatrixwiththenewgroupisshowninFigure14.Noticethatthegroupisdefinedasthetwostereooutput
channelsAmplifierandEagleEye.