Polycom HDX Series User Manual

User’s Guide for Polycom HDX Room Systems
24 © Polycom, Inc.
To create a new local group:
1. Press Directory on the remote control.
2. Select Group.
3. Select Edit Groups.
4. Enter a group name.
5. Press
Back or an arrow button on the remote control to save the new
group.
To delete a local group:
1. Press Directory on the remote control.
2. Select Group.
3. Select Edit Groups.
4. Scroll to the group name you want to delete, and then select Delete.
To assign an entry to a local group:
1. Press Directory on the remote control.
2. Scroll to the entry you want to assign to a group.
3. Select Options then Edit Entry.
4. Select the Group.
5. Select Save to save your changes and return to the directory. If the entry
you edited was a global entry, your changes are saved as a local copy. If
you save an entry to the Contacts group, it appears on the Contacts home
screen but not the Speed Dial or Sites list on the Place a Call screen.
When you delete a group, all entries in that group are deleted. If you want to keep
these entries, be sure to assign them to a new group before you delete the old
group.

Polycom HDX Series Specifications

General

Network Protocols	H.323, SIP
Video Resolution	1080p (depending on model)
Audio Technology	Polycom StereoSurround
Content Sharing	People+Content
Microphone	Integrated or external
Video Standards	H.264, H.263
Audio Standards	G.711, G.722, G.722.1, G.728
Data Standards	H.239
Network Interface	10/100/1000 Ethernet
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI, DVI-I
Audio Inputs	HDMI, RCA
Audio Outputs	RCA
Power Consumption	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Humidity	10% to 90% non-condensing