APPLIANCE EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
I
NSTALLING THE REALPRESENCE COLLABORATION SERVER (RMX) 4000
38 P
OLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
– Fasten the RealPresence Collaboration Server to the rack with
screws through the four holes in the RealPresence Collaboration
Server front mounting brackets.
Figure 1-15: Install the RealPresence Collaboration Server (RMX) 2000 on a shelf
Install the RealPresence Collaboration Server (RMX) 4000 in a 23” Rack
The airflow of the RealPresence Collaboration Server (RMX) 4000 is from right
to left. When you install it in a rack, be sure that the areas on the left and right
side of the system are clear for proper ventilation.
1. To install the RealPresence Collaboration Server (RMX) 4000 in a 23”
rack:
2. Mounting the RealPresence Collaboration Server (RMX) 4000 on a 23”
rack requires that first the handles and then the 19” brackets be
removed from the MCU, as shown in the figure below.
Figure 1-16: Removing and attaching 19” and 23” brackets
To Next Page
Loading...
