Page 1 of 1
SoundStation VTX 1000® Software version 1.6 Release Notes
Date: April 25, 2005
Specific Release version: 1.60.009
Subject: Software Release Notes describing changes from Software Version 1.5 to Software version 1.6
New features
This release includes support for use with the new Polycom QSX™ Voice+Content™ product.
The additional user display interface includes QSX-based SoundStation VTX 1000 soft keys for previewing,
starting, and stopping QSX content when the SoundStation VTX 1000 is connected to the QSX product. These
features enable the SoundStation VTX 1000 to function as the QSX Content Controller. Therefore, SoundStation
VTX 1000 users do not need to purchase the QSX Content Controller bundle.
Please purchase the QSX 300 for this solution, or a specially priced QSX 300/SoundStation VTX 1000 bundle.
Software Improvements/Bug Fixes
Audio
1. The SoundStation VTX 1000 start-up tone sound is may distort when Conference Link is active at boot
time. This problem has been corrected.
Misc.
1. Ring processing has been changed to improve SoundStation VTX 1000 ring sensitivity. This change
supports improved Ring Detection when the SoundStation VTX 1000 is connected to a PBX.
2. Flash timing was adjusted by to deliver exact flash timing to the network.
Modem
1. A Country Code parameter has been defined to provide control of delay between off-hook and initial VTX
wideband negotiation to adjust the SoundStation VTX 1000 for variances in a network where needed
User Interface
1. When the VTX is connected behind certain PBXs, a partial ring or missed ring may occur. Improvements
were made to correct this issue.
Need help?
Power
Operating Environment
Weight and Dimensions
