Polycom SpectraLink 6020 Administration Guide

SpectraLink 6020 Wireless Telephone: HAT: Administration Guide: SpectraLink 6000 System
2. Set up a folder for the USB files and extract the two files from the
zip file into this folder. These are named
slnkusb.sys and slnkusb.inf.
The USB driver may be left on the Installation Manuals CD and
installed from there if preferred.
3. Place the Dual Charger on a flat, horizontal surface, and plug the
power supply into the Dual Charger and into an appropriate wall
outlet. Plug the USB cable into the Dual Charger and into an
available USB port on the PC.
4. Power off a SpectraLink 6020 Wireless Telephone and place it in
the Charger. The handset will automatically power up in USB
mode.
5. Microsoft Windows will start the
Found New Hardware Wizard and
ask if it can connect to
Windows Update to search for software. Click
the
No, not this time option. Click the Next button.
PN: 1725-36094-001_C.doc
12

Polycom SpectraLink 6020 Specifications

General

Brand	Polycom
Model	SpectraLink 6020
Category	Cordless Telephone
Language	English