Polycom VVX201 Configuration Guide

This Configuration Guide is written as general guide on how to configure the Polycom phone
model VVX 201 to work with PBXware 4.1.
Video Tutorial
Video tutorial explaining Auto Provisioning setup for Polycom Phone on PBXware 4.
Video tutorial explaining Auto Provisioning setup for Polycom Phone on PBXware 5.
Requirements
Identifying phone model
To start and successfully complete registration of your Polycom phone you need to know which
phone model you will setup.
From the back of each Polycom phone there are exact model information that you should check.
Although different phone models can have exactly the same requirements and installation
procedure, phone models can also have significantly different requirements and installation
procedure, so that ignorance of your own model may result in the inability to successfully set up
your phone.

Polycom VVX201 Specifications

General

Ethernet Ports	2 x 10/100 Mbps
SIP Accounts	2
Wall Mountable	Yes
Bluetooth Support	No
Wi-Fi Support	No
USB Port	No
Power over Ethernet (PoE)	Yes, IEEE 802.3af Class 2
Audio Features	Acoustic Clarity Technology
Network Protocols	SIP, RTP, RTCP, HTTP, HTTPS
Voice Codecs	G.711, G.729A, G.722
Headset Port	RJ9
Display	132 x 64 pixel backlit graphical LCD