Polygroup SUMMER WAVES SKIMMERPLUS SFX330 - PRELIMINARY STEPS; Filter Pump Important Notes; Filter Pump Power Info; PARTS LIST

7
OWNER’S MANUAL
Model
SFX330
Wattage
30 Watts
Amperage
0.5 Amps
FILTER PUMP POWER INFO
PARTS LIST
Qty. Qty.
1
1
1
1
1
1
1
1
1
2
2
1
1
Parts Name
Motor Seal Nut
Rubber Nozzle
Pump Motor Assembly
Canister Gasket / Motor Seal
Top Cover
Weir Foam
Filter Cartridge
Weir
Skimmer Canister
Hose Connection O-Ring
Hose Clamp
Return Hose
90° Elbow
1
1
1
1
1
1
1
1
1
1
1
1
1
RF Nut
RF Thrust Washer
Pool Wall (for reference only)
RF Gasket (black)
Return Fitting (RF), threaded
RF Diverter
RF Locking Ring, threaded
Service Plug
Skimmer Seal Ring
Water Stopper
SFX Skimmer Strainer Basket
Skimmer Gasket Rubber Seal
GFCI Power Cord Set
Item Item Parts Name
1
2
3
4
5
6
7
8
9
1. The installer shall follow the written instructions provided for the operation of the filter pump system.
2. All electrical components shall be installed in accordance with Article 680 of the 2017 National Electrical Code
®
(NEC
®
) or its latest approved edition.
3. This Filter Pump is manufactured by Polygroup
®
and ETL control number 4000608 and 4006317 – double insulated and grounded – 120VAC 60Hz. All units must
have a minimum of 105VAC to start and run properly.
PRELIMINARY STEPS
FILTER PUMP IMPORTANT NOTES
1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your Filter Pump.
2. It is recommended to have some petroleum jelly (not included) on hand for lubricating the gaskets and o-rings.