Polyprint TexJet echo 2 - Printer Setup; Attach Snap On Platen

POLYPRINTDTG.COM
INSTALLATION GUIDE
3
| 05_STEP
Remove the blue security tapes from the TexJet
®
echo² covers.
Fig.6: Remove the yellow safety bar.
NOTE: Do not throw it away, you will need it when transporting
the printer.
NOTE: Do not move the table tray fast.
| 01_STEP
Attach Snap On Platen on the TexJet
®
echo² Tower.
Printer Setup
| 04_STEP
Remove the yellow safety bar and store it at a safe place.
Fig.4: Remove the screw. Fig.5: Pull the tower out slowly.