POLYPRINTDTG.COM
INSTALLATION GUIDE
7
| 02_STEP
Press AUTO on the lower panel to set the platen at optimum distance
from the head. When nished, press Start Position Button or Blue
Button to send table inside.
| 01_STEP
Press the power button and select the desired language.
Fig.12: TexJet
®
shortee² Ink charge process.
Click on the Initial Charge to start
the Ink charge procedure.
Perform Nozzle Test
Insert one of the transparent sheets
that come with the printer on the left
corner of the 27x40cm platen.
Fig.13: TexJe
t®
shortee² Nozzle test.
NOTE:
If Limit light turns red, lower the table by pressing the DOWN
button, until it turns off and press Start Position Button. When the
platen is inside, a READY TO PRINT indication should be displayed
on the Platen Control panel.
NOTE: If the Blue Led Button is on, the tray is not in printing position.
To Next Page
Loading...
