PolyScience MX-CA11B User Manual

110-511 PSC/EN 10
Normal Operation
Keys and Controls
Power
Turns the Immersion Circulator ON.
Menu
Accesses the Temperature Controller’s set-up sub-menus. The items in
these sub-menus are used to configure the Controller’s general
operational parameters (temperature unit, upper and lower temperature
limits, offset calibration, etc.).
Up Arrow
Used to increase temperature set point and other operational
settings/values.
Down Arrow
Used to decrease temperature set point and other operational
settings/values.
Turning Your Circulator ON
Press the key.
All characters/symbols on the LCD will momentarily light. When the Circulator begins running, the actual
and set point temperatures will be displayed and the circulating symbol will be lit.
If the actual bath temperature is lower than the set point temperature, the heat symbol will also be lit.
Main Operational Display
Actual Bath
Temperature
Set Point
Temperature
Heating
C
irculating
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!

PolyScience MX-CA11B Specifications

General

Brand	PolyScience
Model	MX-CA11B
Category	Laboratory Equipment
Language	English