110-511 PSC/EN 12
Selecting the Temperature Unit
The temperature units sub-menu (°C / °F) allows you to select the temperature unit in which the actual
bath temperature and set point temperature are displayed. The factory default is °C.
To Access: Press the
key until the °C/°F appears on the display.
To Change: Press
to select °C; press to select °F.
To Accept: Press or allow the LCD to return to the main operational display
(approximately 10 seconds).
Appears when i
sub-menu
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
To Next Page
Loading...
