110-511 PSC/EN 2
Introduction
Thank you for choosing the MX Immersion Circulator. It is intended for the precise temperature control of
suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with
highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of
applications.
WARNING: PolyScience Circulating Baths are not intended for directly controlling the temperature of
foods, pharmaceuticals, medicines, or other objects which may be ingested by or injected in humans
or animals. Any such objects must be isolated from contact with the bath fluid and bath surfaces.
Here are some of the features that make the MX Immersion Circulator so user-friendly:
• Simple, intuitive operation
• Displays actual and set point temperature simultaneously
• Powerful pump, easy flow adjustment
• Attaches securely to both flat and rounded tank walls
• Converts any tank or vessel up to 28 liters into a reliable circulating bath
• Fully enclosed housing prevents direct contact with pump and heater, yet provides quick
access for inspection and cleaning
• Suitable for use with Class I non-flammable fluids per DIN 12876-1
It will take you very little time to get your new MX Immersion Circulator installed and running, This
Operator’s Manual is designed to guide you quickly through the process. We recommend that you read it
thoroughly before you begin.
info@GlobalScientificSupply.com
www.GlobalScientificSupply.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
To Next Page
Loading...
Need help?
General
