PolyScience Sous Vide Discovery User Manual

www.cuisinetechnology.com 12
Buttons & Controls
Power
Turns the Circulator On, placing it in Standby
mode. The power switch is located on the rear of
the unit.
Run
Starts active operation. Pump begins running;
cooking liquid also begins heating if the set point
temperature is above the actual temperature of
the liquid.
Stop
Pauses operation (Circulator returns to Standby
mode). Cooking liquid circulation and heating
stop.
Menu
Accesses set point temperature, unit of measure
and timer set-up functions.
Increase
Value
Increases the displayed value of the selected
setting (set point temperature or timer).
Decrease
Value
Decreases the displayed value of the selected
setting (set point temperature or timer).
Turning Your Circulator “On”
Press the button. All characters/symbols on the LCD will
momentarily light and then the actual liquid temperature and
the set point temperature (in °F) are displayed. The Circulator
is now in the Standby mode.
DAY-TO- DAY OPER ATION
When the Circulator is in
the Standby mode, neither
the heating (
) icon nor
the circulating (
) icon
is lit.

PolyScience Sous Vide Discovery Specifications

General

Brand	PolyScience
Model	Sous Vide Discovery
Category	Kitchen Appliances
Language	English