PolyScience Sous Vide Discovery User Manual

17
PolyScience Sous Vide
®
DISCOVERY
Removing Mineral or Scale Deposits
Depending on the frequency of use and the hardness of your
water, scale and minerals may build up on your Circulator’s
heater element and pump impeller. These components should
be inspected periodically for such deposits by removing the
protective cover on the bottom rear of the unit. This cover is held
in place with two Phillips head fasteners.
Should cleaning become necessary, run the Circulator in either a
15% white vinegar in water solution or a 10% food-safe calcium/
lime/rust remover in water solution at 140°F / 60°C until the scale
is removed. Dry thoroughly when done.
WARNING: To avoid the potential for
burns, allow the Circulator to cool to room
temperature before removing it from the
cooking vessel.
WARNING: Never operate your Circulator
without the protective cover in place.
!
Pump
Impeller
Heater
Element

PolyScience Sous Vide Discovery Specifications

General

Brand	PolyScience
Model	Sous Vide Discovery
Category	Kitchen Appliances
Language	English