drive or rewriterdrive or rewriter
You will find an exact description of the drive in the user manual of theYou will find an exact description of the drive in the user manual of the
manufacturer.manufacturer.
keykey
Pressing the black key, the workstation will be switched on or off.Pressing the black key, the workstation will be switched on or off.
in the front flapin the front flap
To secure the workstation for unauthorized using, the front flap can beTo secure the workstation for unauthorized using, the front flap can be
locked using the key.locked using the key.
The back panel of the workstation for the PSV model -H is shown inThe back panel of the workstation for the PSV model -H is shown in
fi
figugurere 3.3.99. The order of the boards can . The order of the boards can be different from the picture.be different from the picture.
Mains socket with a mains switch and mains voltage selector. Instead ofMains socket with a mains switch and mains voltage selector. Instead of
using the voltage selector, the mains voltage input can also be designedusing the voltage selector, the mains voltage input can also be designed
as a wide range input (refer toas a wide range input (refer tosec
sectiotionn 3.13.1). The mains switch disconnects). The mains switch disconnects
the workstation from the mains (position O) and is used to turn it off inthe workstation from the mains (position O) and is used to turn it off in
case of danger.case of danger.
Figure 3.9: Rear view of the workstation for the PSV model -HFigure 3.9: Rear view of the workstation for the PSV model -H
If applicable,If applicable,
check the setting of the mains voltage selectorcheck the setting of the mains voltage selector
connecting theconnecting the
workstaworkstation to the mainstion to the mains !!
To Next Page
Loading...
