Polytec PSV 300 - Page 24


        
                 
   connector (6-pin circular jack)connector (6-pin circular jack)

  
connector (6-pin circular jack)connector (6-pin circular jack)
   connectorconnector
Jack of the Ethernet network boardJack of the Ethernet network board

 
port (Universal Serial Bus)port (Universal Serial Bus)
Alternative jack for peripheral devices like mouse, keyboard, etc.Alternative jack for peripheral devices like mouse, keyboard, etc.

Serial interfaceSerial interface (9-pin Sub-D connector)(9-pin Sub-D connector)
Jack for the RS-232 cable to the junction box to control the video cameraJack for the RS-232 cable to the junction box to control the video camera
 ParallelParallel connector (25-pin Sub-D jack)connector (25-pin Sub-D jack)
 Serial interfaceSerial interface

(9-pin Sub-D connector)(9-pin Sub-D connector)
Jack for the RS-232 cable to the controller to control the PSV via theJack for the RS-232 cable to the controller to control the PSV via the
softwaresoftware
  connector (9-pin Sub-D jack)connector (9-pin Sub-D jack)
Jack for the video cable to the junction box to transmit the video signalJack for the video cable to the junction box to transmit the video signal

  connector (15-pin Sub-D jack)connector (15-pin Sub-D jack)

  
connector for the connector for the internal function generator (SCSI-Iinternal function generator (SCSI-II type)I type)
Jack for the generator cable of the internal function generator to theJack for the generator cable of the internal function generator to the
junjunction ction boxbox
   connector for the connector for the data acquisition (VHDIC type)data acquisition (VHDIC type)
Jack for the Y-shaped acquisition cable to the junction box to transmitJack for the Y-shaped acquisition cable to the junction box to transmit
both measurement and control signalsboth measurement and control signals

 
connector (62-pin Sub-D jack)connector (62-pin Sub-D jack)
Jack for the DIO/Jack for the DIO/ DAC cable to the junctioDAC cable to the junction box to control the scannern box to control the scanner
mirrors and the pan-tilt stagemirrors and the pan-tilt stage
     


These openings mustThese openings must

be kept free to ensure sufficient cooling! The distance frombe kept free to ensure sufficient cooling! The distance from
the wall shouthe wall should be at least 50mmld be at least 50mm !!