ParallelParallel connector (25-pin Sub-D jack)connector (25-pin Sub-D jack)
Serial interfaceSerial interface
(9-pin Sub-D connector)(9-pin Sub-D connector)
Jack for the RS-232 cable to the controller to control the PSV via theJack for the RS-232 cable to the controller to control the PSV via the
softwaresoftware
connector (9-pin Sub-D jack)connector (9-pin Sub-D jack)
Jack for the video cable to the junction box to transmit the video signalJack for the video cable to the junction box to transmit the video signal
connector (15-pin Sub-D jack)connector (15-pin Sub-D jack)
connector for the data acquisition (SCSI-II type)connector for the data acquisition (SCSI-II type)
Jack for the acquisition cable to Jack for the acquisition cable to the junction box to the junction box to transmit bothtransmit both
measurement and control signalsmeasurement and control signals
The PSV model -U has two VHDIC connectors instead of theThe PSV model -U has two VHDIC connectors instead of the
SCSI-II type connector (refer to PSV model -H).SCSI-II type connector (refer to PSV model -H).
connector (62-pin Sub-D jack)connector (62-pin Sub-D jack)
Jack for the DIO/Jack for the DIO/ DAC cable to the junctioDAC cable to the junction box to control the scannern box to control the scanner
mirrors and the pan-tilt stagemirrors and the pan-tilt stage
These openings mustThese openings must
be kept free to ensure sufficient cooling! The distance frombe kept free to ensure sufficient cooling! The distance from
the wall shouthe wall should be at least 50mmld be at least 50mm !!
To Next Page
Loading...
