Polytec PSV 300 - Page 27


        
                
  
    


The scanning head is mounted on either a tripod with fluid stage (OFV-S2) orThe scanning head is mounted on either a tripod with fluid stage (OFV-S2) or
a heavy duty tripod with motorized pan-tilt stage (optional PSV-Z-017). Thea heavy duty tripod with motorized pan-tilt stage (optional PSV-Z-017). The
heavy-duty tripod can also be mounted on heavy-duty tripod can also be mounted on a trolley (optional). The scanninga trolley (optional). The scanning
head mounted on the fluid stage and on the head mounted on the fluid stage and on the tripod is shown intripod is shown infig
figureure 3.13.111..
Before attempting to mount the scanning head, all locking mechanisms of theBefore attempting to mount the scanning head, all locking mechanisms of the
trolley and the tripod, particularly screws, should be checked to trolley and the tripod, particularly screws, should be checked to make suremake sure
they are tight. A loose screw may cause the stand to be unstable and possiblythey are tight. A loose screw may cause the stand to be unstable and possibly
collapse.collapse.
Figure 3.11: Scanning head mounted on the fluid stage and on the tripodFigure 3.11: Scanning head mounted on the fluid stage and on the tripod


It is best to carry out the following assembly when someone is there to help you!It is best to carry out the following assembly when someone is there to help you!