4.4. UnpUnpack thack the tripoe tripod and checd and check it for extk it for external daernal damage (smage (scratcratchesches, loose, loose
screws, etc.).screws, etc.).
5.5. AssAssemblemble the tripoe the tripod as descrd as described in the assibed in the assemblembly instry instructiuctions froons from them the
manufacturer MANFROTTO.manufacturer MANFROTTO.
6.6. UnscUnscrew threw the plate oe plate on the ton the top of the tp of the tripod aripod and keend keep the plp the plate anate and thed the
screws in case you may need them at a later screws in case you may need them at a later date.date.
7.7. Now mNow mount thount the adapte adapter plaer plate on tte on the top of he top of the trthe tripod usipod using thing the 3 Allee 3 Allenn
screws M6x16 as also shown inscrews M6x16 as also shown infig
figureure 3.13.133. Ensure that the knob on the. Ensure that the knob on the
underside of the tripod is always tightened securely.underside of the tripod is always tightened securely.
8.8. ScreScrew the conw the connectnector box on the aor box on the adaptedapter plate usr plate using the 4 Aling the 4 Allen scrlen screwsews
M8M8xx 40. T40. To do this, use the Allen key size 6.o do this, use the Allen key size 6.
Figure 3.12: Fixing the mounting plate on the scanning headFigure 3.12: Fixing the mounting plate on the scanning head
Figure 3.13: Mounting the pan-tilt stage on the tripodFigure 3.13: Mounting the pan-tilt stage on the tripod
To Next Page
Loading...
