You move the laser beam freely using the arrow keys. To do so, press theYou move the laser beam freely using the arrow keys. To do so, press the
arrow key for the direction you require. If you press the HOME key, then thearrow key for the direction you require. If you press the HOME key, then the
laser beam is positioned so that it is emitted from the scanning headlaser beam is positioned so that it is emitted from the scanning head
perpendicular to the front panel (position (0;0), is perpendicular to the front panel (position (0;0), is indicated in the software).indicated in the software).
When the PSV is controlled via the software (LWhen the PSV is controlled via the software (L
EDED
s REMOTE and LLO are lits REMOTE and LLO are lit
up), you can use the software to position the laser beam, please refer to yourup), you can use the software to position the laser beam, please refer to your
software manual.software manual.
To Next Page
Loading...
