POMCube iCAN NetZero Plus Series - Installation

23
Installation
Tools and Safety Gear
NOTE: Proper tools and safety gears are recommended for installation.
Items
Specification
Notes
Rotary hammer drill
Drill φ 3/8in
and φ 1/2in
Drilling on the ground or concrete
wall.
Hex screwdriver
5/32in or
4mm
Dismantle the lower cover of the
device for wiring.
Phillips screwdriver
PH2
Tighten ground screw and keep
ground wire in place.
Flat head
screwdriver
1/8in or 3mm
Plug/unplug wires of quick
connectors.
Rubber hammer
-
Load expansion bolts.
Cable Cutter
-
Cut and strip wires for installation.
Measuring Tape
-
Measure distance.
Leveling instrument
-
Keep the product positioned,
horizontally.
Vacuum cleaner
-
Clean dirt caused from drilling.
Insulated Gloves
-
Safety gear
Safety Goggles
-
Safety gear
Safety Shoes
-
Safety gear
Dust mask
-
Safety gear
Multimeter
-
Test grounding and wiring.
Marker
φ ≤ 5/16in
-
Socket wrench
Tighten anchor expansion bolts.