5
and local codes.
DANGER: Do not insert foreign objects into any part of iCAN NetZero Plus.
Always use genuine parts and accessories, purchased directly from
POMCube or a POMCube-certified party. Using parts and accessories other
than the provided one may cause short circuits or overheating, and result in
electric shock or fire.
DANGER: Any installation must comply with specifications for wire types,
conductor sizes, electrical and thermal insulation, branch circuit protection,
grounding, and disconnect devices.
DANGER: Keep iCAN NetZero Plus away from children.
CAUTION: Do not paint any part of iCAN NetZero Plus, including any internal
or external components such as the exterior shell or casing.
CAUTION: When installing iCAN NetZero Plus in a garage or near vehicles,
keep it out of the driving path. It shall be standing on the floor. If possible,
install iCAN NetZero Plus on a side wall.
Installation Conditions
(1)
Environmental Conditions
DANGER: Do not expose iCAN NetZero Plus or its components to direct
flame.
DANGER: Do not install iCAN NetZero Plus near heating equipment. Do not
expose iCAN NetZero Plus to direct sunlight.
DANGER: Do not immerse iCAN NetZero Plus or its components in water or
other fluids. Install iCAN NetZero Plus in a location that prevents damage
from flooding.
DANGER: Do not expose iCAN NetZero Plus to ambient temperatures above
60°C (140°F) or below -30°C (22°F). In temperatures below 0°C (32°F), use
an air heater to warm up the battery cabinet before booting the system. A
thermal cover is recommended for the battery cabinet in temperatures
below 0°C (32°F).
CAUTION: Do not use cleaning solvents to clean iCAN NetZero Plus, or
To Next Page
Loading...
