CUSTOM AIR CONDITIONING
1A-11
J-9399
J-9403
Fig.
1A-4 Removing Hub and Drive Plate Lock Nut
2.
Line up key In hub
with
keyway in
shaft.
CAUTION:
To avoid internal
damage
to the com-
pressor, DO NOT drive or pound on hub of drive
/
J-9401-1
J-9401-2
JU
flflHHH
Fig.
1A-6 Removing Hub Retainer and Spacer
plate
assembly
or on end of
shaft
If proper tools
to
remove
and replace clutch parts are not
used,
it is possible to disturb the position of swash plate
(keyed to
main
shaft) and result in compressor
damage.
3
/
16
'
Fig.
1A-5 Removing Hub and Drive Plate
Assembly
Fig.
1A-7 Proper Position of Hub and Drive Key
To Next Page
Loading...
