Pontiac firebird 1968 - Page 668

RADIATOR SUPPORT AND MOUNTING PARTS
13-3
Fig. 13-4 Firebird Support and Baffle Assembly
4. On cars equipped with V-8 engines and auto-
matic transmissions, disconnect and plug the trans-
mission cooler lines.
5. Remove upper fan shield (six cylinder) or upper
shroud bracket (V-8).
6. Remove radiator attaching screws and lift radi-
ator and shroud out of vehicle.
REPLACE
1. Replace radiator by reversing the above
procedure.
2. Torque all mounting screws to 12 lb. ft.
3. Refill radiator with enough coolant to ensure
all weather corrosion protection.