Pontiac firebird 1968 - Page 706

ACCESSORIES
15-21
REMOVE AND REPLACE - FIREBIRD CONSOLE
Manual Transmission (Fig. 15-32)
1. Remove gearshift knob.
2. Remove one screw at each side - console to
floor bracket.
3. Remove rear applique.
4. Remove one screw under rear applique and
another in compartment box.
5. Slide console assembly up off shift lever.
6. To disassemble, remove screws holding upper
frame assembly to console. Remove nuts and re-
move applique and gearshift escutcheon.
7. To replace, reverse above.
Automatic Transmission (Fig. 15-33)
1. Remove gearshift handle.
2. Remove gearshift escutcheon by prying straight
up.
3. Remove shift indicator housing.
4. Remove three screws holding bracket to shifter
assembly.
5. Remove rear applique (see Fig. 15-32) and
screw underneath.
6. Remove one screw in compartment box to floor
pan and remove console assembly.
7. To disassemble (See Fig. 15-32), remove
screws holding upper frame assembly to console.
Remove nuts and remove applique and gearshift
escutcheon.
8. To replace, reverse above.
APPLIQUE
FLOOR BRACKET
FLOOR PAN
Fig. 15-32 Console—Firebird Manual Transmission