Porsche 968 - Child Restraint System Safety; Child Seat Placement with Airbags

The locking mechanism in the inertia reel is de-
signed to lock the belt in the event of strong
acceleration and deceleration, when cornering
and on steep inclines . The locking mechanism
reacts more quickly to acceleration forces than
to pulling forces on the belt.
Releasing the Belt
To release the belt, press the red button
marked "Press". The belt tongue will immediately
spring out of the buckle, even if the belt is
under load .
Make sure that the belt is fully retracted when
not in use. This protects it from dirt and dam-
age.
Check all belts at regular intervals for signs of
damage to the webbing, and make sure that the
buckle and the anchorage points are in good
condition. For your own safety, have the belts
replaced if they have been subjected to heavy
loads in an accident.
Child Restraint System
If a child restraint system is used on the front
passenger's seat of a model fitted with airbags,
the seat must be moved to the rearmost posi-
tion and remain there.
Only use restraint systems specifically permitted
for the front passenger's seat.
Child restrain systems which are supported by
the dashboard must not be used in models
fitted with airbags.
Your Official Porsche Centre will be glad to rec-
ommend appropriate child restraint systems to
you.
21